Results 1 to 3 of 3
  1. #1
    jeffhb
    Guest

    Array Controller Hell!

    How oh How do I change an Array Controller in NT4 Server WITHOUT booting the server up. We have a Compaq server that has a dead 3200 array controller and we have a new 5300 array controller but NT server doesnt like it and blue screens when booting, most probably because the necessary files for the device are missing or the drivers for the 3200 are incompatable.

    Any ideas people? <img src=/S/headthrob.gif border=0 alt=headthrob width=15 height=15>

  2. #2
    Platinum Lounger
    Join Date
    Jan 2001
    Location
    Roanoke area, Virginia, USA
    Posts
    3,729
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Array Controller Hell!

    did it come with instructions? the ones i've seen say to run setup off the included disks first to install the drivers then install the hardware.

  3. #3
    New Lounger
    Join Date
    Jan 2001
    Location
    French Alps
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Array Controller Hell!

    I too, am trying to change disks under a smart2 Compaq array controller these days :
    here, at bios-time boot, the proliant would run a configuration app. in character mode
    asking for a 'array utility diskette' (which can be generated from the Compaq util CD)

    all this takes place *before* NT booting...
    I guess you can launch the character mode app by hitting F10 at power-on :
    this should launch the 'system apps' written in some-hidden-partition by Compaq Wisdom

    -- please do not mind my 'magical' approach on these:
    -1- I'm french, & I have to translate my thoughts
    -2- I inherited 15 days ago of a Compaq server to maintain,
    for which I have not enough logging info, nor docs.
    HTH anyway,
    Marc

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •