Results 1 to 4 of 4
  1. #1
    5 Star Lounger
    Join Date
    Oct 2001
    Location
    San Bernardino, California, USA
    Posts
    734
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Crooked connectors (2007 - all?)

    I am making a flow chart and some connectors don't want to be straight - they have corners and bumps that I don't want and can't explain - see the pic. Any idea how i can prevent this?
    Attached Images Attached Images

  2. #2
    5 Star Lounger
    Join Date
    Oct 2001
    Location
    San Bernardino, California, USA
    Posts
    734
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Crooked connectors (2007 - all?)

    I probably should simply delete this post but since I found the solution, I thought someone else might benefit. I learned there is a connector stencil so I opened it and selected the 'Bottom to Side' connector. Now it works fine... although I still think it should have worked correctly initially.

  3. #3
    Plutonium Lounger
    Join Date
    Nov 2001
    Posts
    10,550
    Thanks
    0
    Thanked 7 Times in 7 Posts

    Re: Crooked connectors (2007 - all?)

    You could use a connector that just has a single right angle, rather than using a dynamic line connector.

    You can find a good selection of connectors in File > Shapes > Visio Extras > Connectors (on my copy of Visio 2003 SP3)

    StuartR

  4. #4
    5 Star Lounger
    Join Date
    Oct 2001
    Location
    San Bernardino, California, USA
    Posts
    734
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Crooked connectors (2007 - all?)

    Yes, that does bring up the connector stencil - the connector I selected was the top/bottom to side... probably the same one you mentioned. I didn't see one named single right angle.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •