Results 1 to 3 of 3
  1. #1
    2 Star Lounger
    Join Date
    Feb 2003
    Posts
    117
    Thanks
    3
    Thanked 2 Times in 2 Posts

    page fault in non-paged area????

    I'm trying to rebuild the software on my system, because I having been getting these errors several times a day. Running Win7 64-bit, 12GB RAM, SSD for operating system and separate one for data files, plus a bunch of backup disks. All disks have plenty of spare space (more than 50%). I have many different applications that I'm trying to load, and have no idea as to how to figure out what the problem is.
    Any help?
    Thanks
    Bob

  2. #2
    Super Moderator jwitalka's Avatar
    Join Date
    Dec 2009
    Location
    Minnesota
    Posts
    5,727
    Thanks
    88
    Thanked 650 Times in 588 Posts
    Some things to check are listed here:
    http://www.online-tech-tips.com/comp...ed-area-error/

    If nothing there helps, try a clean boot and see if the problem still happens.

    Jerry

  3. #3
    Super Moderator satrow's Avatar
    Join Date
    Dec 2009
    Location
    Cardiff, UK
    Posts
    3,146
    Thanks
    155
    Thanked 338 Times in 296 Posts
    Follow the Sticky here carefully, attach the required zip back here and I'll take a look for you.

    STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
    Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS
    List of hardware diags you can use to rule in/out hardware. I'd begin with MemTest86+, ideally test 1 stick at a time for 7+ runs - 11 is better. This is a long test, start each test before bed and/or before going to work.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •