Results 1 to 9 of 9
  1. #1
    New Lounger
    Join Date
    Dec 2009
    Location
    Western Australia
    Posts
    14
    Thanks
    6
    Thanked 0 Times in 0 Posts

    Cannot run program as administrator

    Hi all you helpful people!
    I have an interesting problem with a program originally running happily on Win7 and now installed on Win8 but with real issues.
    The program will not retain any of the preferences I choose.

    Here is what I have tried:
    I chose 'Run as Administrator' and the program would not run (see error message below.
    I changed 'Permissions' on the exe file to make sure there were no restrictions.
    Finally I changed a couple of preferences using Regedit, but the expected different responses did not occur (e.g. view Status Bar = 'StatusBar' set to (1)). This has me totally confused! (I also changed that preference from within the program and observed that the Registry key value did not change.

    Here is the Error Message I get when I try Run As Administrator.

    Cannot open the librarian.System Error Desc: No COM error information.
    Resolution:
    Please restart the application and try again.
    If the problem persists please restart the system.
    If the problem persists please contact technical support.


    BTW I am logged in on an Administrator account.

    Any help would be appreciated.
    Robin

  2. #2
    3 Star Lounger bassfisher6522's Avatar
    Join Date
    Jul 2013
    Location
    NC
    Posts
    344
    Thanks
    48
    Thanked 35 Times in 34 Posts
    What program is it?

  3. The Following 2 Users Say Thank You to bassfisher6522 For This Useful Post:

    BruceR (2014-01-19),CLiNT (2014-01-19)

  4. #3
    New Lounger
    Join Date
    Dec 2009
    Location
    Western Australia
    Posts
    14
    Thanks
    6
    Thanked 0 Times in 0 Posts
    Zondervan Pradis 6 (bible software - Zondervan have abandoned it!)

  5. #4
    Gold Lounger
    Join Date
    Aug 2012
    Location
    UK
    Posts
    2,847
    Thanks
    47
    Thanked 381 Times in 370 Posts
    If it requires Zondervan support for it to run then that may be the problem but have you checked the Compatibility mode in its Properties to see if changing that has any effect ?

  6. #5
    New Lounger
    Join Date
    Dec 2009
    Location
    Western Australia
    Posts
    14
    Thanks
    6
    Thanked 0 Times in 0 Posts
    It has never required Zondervan support to run, so I doubt that that is the problem.
    I have tried the compatibility modes but they give the same result, i.e. Runs OK except cannot save preferences, but will not Run as Administrator.

    I am most interested to know
    (1) if anyone can interpret the Error Code:
    "Cannot open the librarian.System Error Desc: No COM error information"

    (2) If anyone can suggest why changing the data in the Registry keys using Regedit makes no difference to the way the program runs.

  7. #6
    Gold Lounger
    Join Date
    Aug 2012
    Location
    UK
    Posts
    2,847
    Thanks
    47
    Thanked 381 Times in 370 Posts
    Are there any other programs that you are unable to run as an admin and have you run Win 8's Troubleshooter ?
    Last edited by Sudo15; 2014-01-20 at 23:35.

  8. #7
    New Lounger
    Join Date
    Dec 2009
    Location
    Western Australia
    Posts
    14
    Thanks
    6
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by Sudo15 View Post
    Are there any other programs that you are unable to run as an admin and have you run Win 8's Troubleshooter ?
    No, no other programs with this problem.
    Yes, Windows Troubleshooter does not help.

    I think I will try to reinstall the program. (That's quite a pain!)

    Thanks.

  9. #8
    Super Moderator CLiNT's Avatar
    Join Date
    Dec 2009
    Location
    California & Arizona
    Posts
    5,655
    Thanks
    135
    Thanked 524 Times in 481 Posts
    Try running the program in compatibility mode for Windows 7, and then select "run as administrator".
    Run a Program in Compatibility Mode in Windows 8

    Check for an updated version of the program that is Windows 8 compatible.
    If Zondervan no longer supports the program you may be out of luck, seek an alternative.
    DRIVE IMAGING
    Invest a little time and energy in a well thought out BACKUP regimen and you will have minimal down time, and headache.


    Latest Build:
    ASUS X99 Deluxe, Core i7-5960X, Corsair Hydro H100i, Plextor M6e 256GB M.2 SSD, Corsair DOMINATOR Platinum 32GB DDR4@2666, W8.1 64 bit,
    EVGA GTX980, Seasonic PLATINUM-1000W PSU, MountainMods U2-UFO Case, and 7 other internal drives.

  10. The Following User Says Thank You to CLiNT For This Useful Post:

    rcull999 (2014-02-09)

  11. #9
    New Lounger
    Join Date
    Dec 2009
    Location
    Western Australia
    Posts
    14
    Thanks
    6
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by CLiNT View Post
    Try running the program in compatibility mode for Windows 7, and then select "run as administrator".
    Thanks everyone for your suggestions.
    Finally resolved by a complete reinstall (from original through updates - painful but successful).

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •