Results 1 to 5 of 5
  1. #1
    New Lounger
    Join Date
    Dec 2012
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts

    windows live mail

    a photo i have in my olympus master 2 , when i try to send a photo with email launcher,i get the following message, (failed to send email,) i am using windows 7,on a acer laptop, sending email from aol or google and others still work, just not with the olympus, do i have to adjust something or change something in olympus, please help,thanks.

  2. #2
    Super Moderator CLiNT's Avatar
    Join Date
    Dec 2009
    Location
    California & Arizona
    Posts
    5,485
    Thanks
    130
    Thanked 499 Times in 459 Posts
    Download the photos from your camera to a known folder located on your drive, then disconnect the camera.
    Open a new email message to be forwarded in WLM and insert the photo from the folder you just downloaded to.
    DRIVE IMAGING
    Invest a little time and energy in a well thought out BACKUP regimen and you will have minimal down time, and headache.

    Windows 8.1, 64 bit
    Motherboard: DX58SO2*Chipset: X58 Express/Intel ICH10*BIOS: SOX5820J.86A.0888.2012.0129.2203*Processor: Intel Core i7 CPU X 990
    GPU: Nvidia GTX 580*Memory: Corsair 12 GB, 4x3@1600*PSU: Corsair HX1000*Hard drives: REVO X2 160GB*OCZ VERT X3 120GB*5 mechanical storage drives (12 TB) total.

  3. #3
    Silver Lounger mrjimphelps's Avatar
    Join Date
    Dec 2009
    Location
    USA
    Posts
    2,177
    Thanks
    207
    Thanked 213 Times in 205 Posts
    How big is the photo? If it is huge, you may be bumping into the maximum size limit with your email provider.

  4. #4
    Super Moderator CLiNT's Avatar
    Join Date
    Dec 2009
    Location
    California & Arizona
    Posts
    5,485
    Thanks
    130
    Thanked 499 Times in 459 Posts
    Unlikely, I often use WLM to send photos that can be as large as 29MB in size, similar to some of these.
    DRIVE IMAGING
    Invest a little time and energy in a well thought out BACKUP regimen and you will have minimal down time, and headache.

    Windows 8.1, 64 bit
    Motherboard: DX58SO2*Chipset: X58 Express/Intel ICH10*BIOS: SOX5820J.86A.0888.2012.0129.2203*Processor: Intel Core i7 CPU X 990
    GPU: Nvidia GTX 580*Memory: Corsair 12 GB, 4x3@1600*PSU: Corsair HX1000*Hard drives: REVO X2 160GB*OCZ VERT X3 120GB*5 mechanical storage drives (12 TB) total.

  5. #5
    New Lounger
    Join Date
    Apr 2014
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Sorry, I could not find how to start a new thread:

    Very weird problem: Except for my Groups, I successfully imported everything from OE to WLM. So, I recreated my groups.

    Now, a very strange thing happens when I send to my groups: After entering a group in BCC, and clicking Send, WLM does not see the group. After trial and error, the only way to send to the group, I must

    1. Create a new group.
    2. Move all of the members from the old to the new group.
    3. Click Send and all goes well.

    However, that annoying process almost always works only once. Then, I must go through the same procedure whenever I send to the same group.

    Looking for suggestions on how to resolve.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •