Results 1 to 5 of 5
  1. #1
    Lounger
    Join Date
    Dec 2009
    Location
    Perth, Western Australia
    Posts
    42
    Thanks
    1
    Thanked 1 Time in 1 Post

    Copy folder from SSD to HDD fails

    I have a large 22.4 GB folder that I am trying to copy from my SSD 250mb disc to a 2TB HDD, there already is a copy of this folder on the HDD but I am trying to update it. The copying process baulks almost immediately on a file of 269mb which is the downloaded file for Acronis 2014, yet, if I copy and paste that file alone it completes without a problem. I have tried the process in 3 different file managers with the same result. Windows 8.1.1, 8GB RAM

  2. #2
    Lounger
    Join Date
    Dec 2009
    Location
    Perth, Western Australia
    Posts
    42
    Thanks
    1
    Thanked 1 Time in 1 Post
    The Error message is: Error 0x80070570:

  3. #3
    4 Star Lounger access-mdb's Avatar
    Join Date
    Dec 2009
    Location
    Oxfordshire, UK
    Posts
    527
    Thanks
    50
    Thanked 40 Times in 37 Posts
    Have you Googled the error message? There are a number of links to deal with the issue.

  4. #4
    Super Moderator CLiNT's Avatar
    Join Date
    Dec 2009
    Location
    California & Arizona
    Posts
    5,455
    Thanks
    128
    Thanked 497 Times in 457 Posts
    I have a large 22.4 GB folder that I am trying to copy from my SSD 250mb disc
    I take it that SSD is a 250GB disk and not a 250MB flash card?

    1 (Possible bad/corrupt drive/memory cell sector) Run a checkdisk on both drives and check the SMART data as well.
    2 (Operating system issue) Run a "sfc /scannow" on the system.
    DRIVE IMAGING
    Invest a little time and energy in a well thought out BACKUP regimen and you will have minimal down time, and headache.

    Windows 8.1, 64 bit
    Motherboard: DX58SO2*Chipset: X58 Express/Intel ICH10*BIOS: SOX5820J.86A.0888.2012.0129.2203*Processor: Intel Core i7 CPU X 990
    GPU: Nvidia GTX 580*Memory: Corsair 12 GB, 4x3@1600*PSU: Corsair HX1000*Hard drives: REVO X2 160GB*OCZ VERT X3 120GB*5 mechanical storage drives (12 TB) total.

  5. #5
    Lounger
    Join Date
    Dec 2009
    Location
    Perth, Western Australia
    Posts
    42
    Thanks
    1
    Thanked 1 Time in 1 Post
    Thank you for your replies. Yes, the SSD is a 250GB disc. I did search that error message but the general advice was to run error checking on both discs, which I did with no errors found. I then deleted the 22.4gb folder from the target disc and tried again and then it copied perfectly, very strange.
    Regards
    Peter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •