Results 1 to 2 of 2
2016-03-03, 04:30 #1
- Join Date
- Feb 2016
- Thanked 0 Times in 0 Posts
Windows 10 - Automatic Repair - boots in 2nd cycle
Hello. This is similiar topic on our forum but now i will explain more brighter.
So last time after i change in my UEFI boot priority (weird but on past it working fine ) from :"UEFI USB KINGSTON" to "P1 SSD SAMSUNG EVO 250 GB" i am getting weird booting problem with Windows 10.
When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc. Then after this i get screen with Your pc did not start correctly or Automatic Repair couldnt repair your pc . And when i click restart then Windows 10 boot fine. So i am needing 2 boots to boot properly to windows.
My disk is on MBR partirion. Is this related to my UEFI/Partitions?
Somebody said to me this:"UEFI booting requires a GPT disk. This is why Windows has to fix itself and only boots in 2nd cycle - as you keep trying to boot UEFI to an MBR disk."
Also i know that UEFI firmware can emulate BIOS functionality (CSM/Legacy) and work with MBR disks just fine. Or i am wrong? And cause is elsewhere? Hardware, software/bios issue?
I am a little confused. Thx for reply. My ssd Samsung Evo 250 GB , rams 2x8gb DDR3 Kingston Hyperx 1600mhz.
2016-03-03, 06:15 #2
- Join Date
- Jun 2011
- New England
- Thanked 696 Times in 611 Posts
Also posted at:
Please see Rule 14
Consider this a warning. Next time you will be banned.